Search for: All records

Motor vehicles are among the major sources of pollutants and greenhouse gases in urban areas and a transition to “zero emission vehicles” is underway worldwide. However, emissions associated with brake and tire wear will remain. We show here that previously unrecognized volatile and semi-volatile organic compounds, which have a similarity to biomass burning emissions are emitted during braking. These include greenhouse gases or, these classified as Hazardous Air Pollutants, as well as nitrogencontaining organics, nitrogen oxides and ammonia. The distribution and reactivity of these gaseous emissions are such that they can react in air to form ozone and other secondary pollutants with adverse health and climate consequences. Some of the compounds may prove to be unique markers of brake emissions. At higher temperatures, nucleation and growth of nanoparticles is also observed. Regions with high traffic, which are often disadvantaged communities, as well as commuters can be impacted by these emissions even after combustion-powered vehicles are phased out. 

The distribution system is an integral part of the electric power system, but not much is known about how it behaves in real-time. To address this knowledge gap, a low-cost, time-synchronized, micro point-on-wave recorder is designed, built, and characterized in this paper. The inductively powered recorder operates wirelessly by using the current flowing through a typical distribution conductor. The recorder is designed to be small, lightweight, and is intended to be installed directly on the power line. To validate the performance of this recorder, tests of measurement accuracy, electric current requirements, and susceptibility to electromagnetic interference from both steady-state and arc-induced sources are performed. The results indicate that the proposed recorder satisfies both the technical as well as the economical constraints required for bulk deployment in an actual distribution network. 

With the growing interest in scale-resolving simulations of spatially evolving boundary layers, synthetic turbulence generation (STG) has become a valuable tool for providing unsteady turbulent boundary conditions through a sum over a finite number of spatio-temporal Fourier modes with amplitude, direction and phase determined by a random number set. Recent developments of STG methods are designed to match target profiles for anisotropic and inhomogeneous Reynolds stresses. In this paper, it is shown that, for practical values of the number of modes, a given set of random numbers may produce Reynolds stress profiles that are 30 % off their target. To remedy this situation, the error in the STG stress prediction is decomposed into a steady-state bias and a purely unsteady part affecting the time convergence. Direct relationships between the random number vectors and both types of error are developed, allowing large collections of random number sets to be rapidly scanned and the best performers selected for a much improved agreement with the target. The process is verified for the inflow to a direct numerical simulation of a flat plate at $$Re_\theta = 1000$$ . This paper demonstrates sufficient time convergence over a few flow-through times as well as a correction of the method's biases. 

The statistical characterization of the measurement errors of a phasor measurement unit (PMU) is currently receiving considerable interest in the power systems community. This paper focuses on the characteristics of the errors in magnitude and angle measurements introduced only by the PMU device (called random errors in this paper), during ambient conditions, using a high-precision calibrator. The experimental results indicate that the random errors follow a non-Gaussian distribution. They also show that the M-class and P-class PMUs have distinct error characteristics. The results of this analysis will help researchers design algorithms that account for the non-Gaussian nature of the errors in synchrophasor measurements, thereby improving the practical utility of the said-algorithms in addition to building on precedence for using high-precision calibrators to perform accurate error tests. 

Abstract Despite the f₀(980) hadron having been discovered half a century ago, the question about its quark content has not been settled: it might be an ordinary quark-antiquark ($${{\rm{q}}}\overline{{{\rm{q}}}}$$ $q\overline{q}$) meson, a tetraquark ($${{\rm{q}}}\overline{{{\rm{q}}}}{{\rm{q}}}\overline{{{\rm{q}}}}$$ $q\overline{q}q\overline{q}$) exotic state, a kaon-antikaon ($${{\rm{K}}}\overline{{{\rm{K}}}}$$ $K\overline{K}$) molecule, or a quark-antiquark-gluon ($${{\rm{q}}}\overline{{{\rm{q}}}}{{\rm{g}}}$$ $q\overline{q}g$) hybrid. This paper reports strong evidence that the f₀(980) state is an ordinary$${{\rm{q}}}\overline{{{\rm{q}}}}$$ $q\overline{q}$meson, inferred from the scaling of elliptic anisotropies (v₂) with the number of constituent quarks (n_q), as empirically established using conventional hadrons in relativistic heavy ion collisions. The f₀(980) state is reconstructed via its dominant decay channel f₀(980) →π⁺π⁻, in proton-lead collisions recorded by the CMS experiment at the LHC, and itsv₂is measured as a function of transverse momentum (p_T). It is found that then_q= 2 ($${{\rm{q}}}\overline{{{\rm{q}}}}$$ $q\overline{q}$state) hypothesis is favored overn_q= 4 ($${{\rm{q}}}\overline{{{\rm{q}}}}{{\rm{q}}}\overline{{{\rm{q}}}}$$ $q\overline{q}q\overline{q}$or$${{\rm{K}}}\overline{{{\rm{K}}}}$$ $K\overline{K}$states) by 7.7, 6.3, or 3.1 standard deviations in thep_T< 10, 8, or 6 GeV/cranges, respectively, and overn_q= 3 ($${{\rm{q}}}\overline{{{\rm{q}}}}{{\rm{g}}}$$ $q\overline{q}g$hybrid state) by 3.5 standard deviations in thep_T< 8 GeV/crange. This result represents the first determination of the quark content of the f₀(980) state, made possible by using a novel approach, and paves the way for similar studies of other exotic hadron candidates. 

A<sc>bstract</sc> Inclusive and differential cross sections for Higgs boson production in proton-proton collisions at a centre-of-mass energy of 13.6 TeV are measured using data collected with the CMS detector at the LHC in 2022, corresponding to an integrated luminosity of 34.7 fb⁻¹. Events with the diphoton final state are selected, and the measured inclusive fiducial cross section is$${\sigma }_{\text{fid}}={74}\pm {11}{\left({\text{stat}}\right)}_{-4}^{+5}\left({\text{syst}}\right)$$fb, in agreement with the standard model prediction of 67.8 ± 3.8 fb. Differential cross sections are measured as functions of several observables: the Higgs boson transverse momentum and rapidity, the number of associated jets, and the transverse momentum of the leading jet in the event. Within the uncertainties, the differential cross sections agree with the standard model predictions. 

Incoherent $J/\psi$photoproduction in heavy ion ultraperipheral collisions (UPCs) provides a sensitive probe of localized, fluctuating gluonic structures within heavy nuclei. This Letter reports the first measurement of the photon-nucleon center-of-mass energy ( $W_{\gamma \mathrm{N}}$) dependence of this process in PbPb UPCs at a nucleon-nucleon center-of-mass energy of 5.02 TeV, using $1.52{\mathrm{nb}}^{-1}$of data recorded by the CMS experiment. The measurement covers a wide $W_{\gamma \mathrm{N}}$range of $\approx 40–400\mathrm{GeV}$, probing gluons carrying a fraction $x$of nucleon momentum down to an unexplored regime of $6.5\times {10}^{-5}$. Compared to baseline predictions neglecting nuclear effects, the measured cross sections exhibit significantly greater suppression at lower $x$. Additionally, the ratio of incoherent to coherent photoproduction is found to be constant across the probed $W_{\gamma \mathrm{N}}$and $x$range, disfavoring the establishment of the black disk limit. This Letter provides critical insights into the $x$-dependent evolution of fluctuating gluonic structures within nuclei and calls for further advancements in theoretical models incorporating nuclear shadowing and gluon saturation. 

A<sc>bstract</sc> A search for the production of a single top quark in association with invisible particles is performed using proton-proton collision data collected with the CMS detector at the LHC at$$\sqrt{s}=13$$TeV, corresponding to an integrated luminosity of 138 fb⁻¹. In this search, a flavor-changing neutral current produces a single top quark or antiquark and an invisible state nonresonantly. The invisible state consists of a hypothetical spin-1 particle acting as a new mediator and decaying to two spin-1/2 dark matter candidates. The analysis searches for events in which the top quark or antiquark decays hadronically. No significant excess of events compatible with that signature is observed. Exclusion limits at 95% confidence level are placed on the masses of the spin-1 mediator and the dark matter candidates, and are compared to constraints from the dark matter relic density measurements. In a vector (axial-vector) coupling scenario, masses of the spin-1 mediator are excluded up to 1.85 (1.85) TeV with an expectation of 2.0 (2.0) TeV, whereas masses of the dark matter candidates are excluded up to 0.75 (0.55) TeV with an expectation of 0.85 (0.65) TeV. 

The polarization of the $\mathrm{\Lambda }$and $\overline{\mathrm{\Lambda }}$hyperons along the beam direction has been measured in proton-lead ( $p\text{-Pb}$) collisions at a center-of-mass energy per nucleon pair of 8.16 TeV. The data were obtained with the CMS detector at the LHC and correspond to an integrated luminosity of $186.0\pm 6.5{\mathrm{nb}}^{-1}$. A significant azimuthal dependence of the hyperon polarization, characterized by the second-order Fourier sine coefficient $P_{z,\mathrm{s}2}$, is observed. The $P_{z,\mathrm{s}2}$values decrease as a function of charged particle multiplicity, but increase with transverse momentum. A hydrodynamic model that describes the observed $P_{z,\mathrm{s}2}$values in nucleus-nucleus collisions by introducing vorticity effects does not reproduce either the sign or the magnitude of the $p\text{-Pb}$results. These observations pose a challenge to the current theoretical implementation of spin polarization in heavy ion collisions and offer new insights into the origin of spin polarization in hadronic collisions at LHC energies.